检索结果分析
成果/Result
成果类型
- 期刊论文
- 学位论文
- 专利
- 会议论文
- 科技成果
- 标准
- 专著
- 产品
- 科技报告
- 政策法规
- 内部文献
- 报纸
- A review of the thermal stability of metastable austenite in steels: Martensite formation
- JOURNAL OF MATERIALS SCIENCE & TECHNOLOGYLi, Yong San Martin, David Wang, Jinliang Wang, Chenchong Xu, Wei 出版年：2021
- Metastable austenite plays a critical role in achieving improved combinations of high strength and high ductility/toughness in the design of advanced high-strength steels (AHSS). The thermal stability of metastable auste...
- Role of martensitic transformation sequences on deformation-induced martensitic transformation at high strain rates: A quasi in-situ study
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGHuang, Minghao Yuan, Jiahua Wang, Jinliang Wang, Lingyu Mogucheva, A. Xu, Wei 出版年：2022
- For the mechanical behavior of steels with metastable austenite, it was widely accepted that high strain rates could weaken deformation-induced martensitic transformation (DIMT) and reduce work-hardening behavior. This l...
- Structural, magnetic properties and large cryogenic magnetocaloric effect (MCE) in RE2MgTiO6 (RE = Tb, Dy, Ho and Er) double perovskite (DP) oxides
- CERAMICS INTERNATIONALJia, Youshun Wang, Jiaxin Wang, Ziao Chen, Xinjie Wang, Jinliang 出版年：2024
- We have systematically studied the crystal structure, cryogenic magnetic properties and MCE in RE2MgTiO6 (RE = Tb, Dy, Ho and Er) DP oxides. The four RE2MgTiO6 samples are all found to crystallize in a monoclinic DP stru...
- The role of copper in microstructure and toughness of intercritically reheated coarse grained heat affected zone in a high strength low alloy steel
- MATERIALS CHARACTERIZATIONWang, Jinliang Wang, Shuai Xi, Xiaohui Wang, Gui Chen, Liqing 出版年：2021
- This paper presents an investigation on the role of Cu addition in microstructure and toughness of intercritically reheated coarse grained heat affected zone (ICCGHAZ), aiming at elucidating the influencing mechanism of ...
- Transitions in the thermal stability of pre-strained austenite - competing effects between defect density and slip band spacing
- SCRIPTA MATERIALIADong, Guangqi Wang, Jinliang Wang, Lingyu Wang, Chenchong Hu, Jun Xu, Wei 出版年：2023
- The transition from mechanical destabilization to stabilization in metastable austenite is an important issue affecting the design of structures used at lower temperatures. We have conducted in-situ magnetic measurement ...
- Research on the mechanism of Cu addition on the grain boundary characteristics and toughness in CGHAZ of low carbon low alloy steel
- JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&TXi, Xiaohui Wu, Tong Wang, Shuai Wang, Jinliang Wang, Gui Chen, Liqing 出版年：2023
- In this study, the coarse grained heat affected zone (CGHAZ) of Cu-containing/free steels was simulated at various heat inputs by thermal simulator. A comparative study was conducted to reveal the role of Cu addition and...
- Response of hydrogen diffusion and hydrogen embrittlement to Cu addition in low carbon low alloy steel
- MATERIALS CHARACTERIZATIONWang, Jinliang Xu, Ning Wu, Tong Xi, Xiaohui Wang, Gui Chen, Liqing 出版年：2023
- Hydrogen embrittlement (HE) has arisen as a critical issue for the development of high strength steel. The austenite and Cu-rich precipitates can provide stable trapping sites for diffusible hydrogen, and thus improved t...
- Optimizing crack initiation energy in austenitic steel via controlled martensitic transformation
- JOURNAL OF MATERIALS SCIENCE & TECHNOLOGYHuang, Minghao Wang, Lingyu Wang, Chenchong Li, Yizhuang Wang, Jinliang Yuan, Jiahua Hu, Jun Huang, Mingxin Xu, Wei 出版年：2024
- Although the seemingly negative effect of deformation-induced martensite (DIM) volume fraction on the impact toughness of austenitic steels has been well documented, it relies mostly on analyzing crack propagation withou...
- Characterization and corrosion behavior of Ni-Cr coatings by using pulse current electrodeposition
- ANTI-CORROSION METHODS AND MATERIALSZhu, Yesen Gu, Cheng-Qing Wang, Jinliang Xi, Xiaohui Qin, Zhenbo 出版年：2023
- PurposeThe purpose of this paper is to study the effect of chromium content on the microstructure and corrosion resistance of Ni-Cr coating. Design/methodology/approachNi-Cr coating was prepared by pulse current electrod...
- The role of reverted transformation in hydrogen embrittlement of a Cu-containing low carbon high strength steel
- JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&TXi, Xiaohui Wu, Tong Tian, Yuwan Hu, Jun Huang, Shuntian Xie, Tingxin Wang, Jinliang Chen, Liqing 出版年：2023
- This work presents an investigation on the role of reverted transformation in hydrogen embrittlement, aiming at revealing the influencing mechanism of austenite and grain boundary characteristics on hydrogen embrittlemen...
- Enhancement of the resistance to hydrogen embrittlement by tailoring grain boundary characteristics in a low carbon high strength steel
- JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&TXi, Xiaohui Liu, Zhikun Qin, Zhenbo Wu, Tong Wang, Jinliang Xu, Ning Chen, Liqing 出版年：2023
- In this work, the feasibility of using "grain boundary engineering" to reduce the susceptibility to hydrogen embrittlement in a low carbon low alloy steel was examined. By adding Cu element, the fraction of random grain ...
- Optimizing the hydrogen embrittlement resistance by Cu addition in a low carbon high strength steel
- ENGINEERING FAILURE ANALYSISWang, Jinliang Liu, Xing Hu, Jiezhen Tian, Yuwan Xi, Xiaohui Chen, Liqing 出版年：2024
- This study used the electrochemical hydrogen permeation test and the slow strain rate tensile (SSRT) test to examine the impact of Cu addition on hydrogen embrittlement (HE) in a low carbon high strength steel. The follo...
- Crucial Microstructural Features to Determine the Mechanical Properties of Welded Joints in a Cu-Containing Low-Carbon Low-Alloy Steel After Postweld Heat Treatment
- METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCEWang, Jinliang Dong, Guangqi Li, Youchi Xi, Xiaohui Chen, Liqing 出版年：2022
- The effect of welding and postweld heat treatment on the microstructural characteristics and mechanical properties of a Cu-containing low-carbon low-alloy steel was studied. The obtained results indicated that ferrite, b...
- Scale-up fabrication of gradient AGS in austenitic stainless steels achieves a simultaneous increase in strength and toughness
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGHuang, Minghao Wang, Lingyu Yuan, Sen Wang, Jinliang Wang, Chenchong Mogucheva, Anna Xu, Wei 出版年：2022
- Simultaneous strengthening and toughening of austenitic stainless steel are of great importance in safety-critical applications. Gradient structured steels have thus attracted significant interest as they can achieve unp...
- Formation mechanism of faulted bands and its effect on ?'-martensitic transformation
- MATERIALS & DESIGNXi, Xiaohui Dong, Guangqi Wang, Lingyu Hu, Jun Shen, Chunguang Wang, Jinliang Xu, Wei 出版年：2022
- Understanding the martensitic transformation mechanism is of critical importance to control martensitic transformations and hence retained austenite. Linear defects reported in a previous study can provide nucleation sit...
- The Role of Cu Addition in Microstructural Characteristics and Mechanical Properties in Submerged Arc Welded Joint of Low Carbon Low Alloy Steel
- MATERIALS TRANSACTIONSXi, Xiaohui Feng, Yang Yang, Guoli Zhang, Hejia Wang, Jinliang 出版年：2022
- A good strength-toughness combination is difficult to be obtained in welded joint of low carbon low alloy steel. In this work, a new idea was proposed to improve the strength and toughness of welded joint by strengthenin...
- Enabling strong and formable advanced high-strength steels through inherited homogeneous microstructure
- SCRIPTA MATERIALIAXu, Ning Wang, Lingyu Hu, Jun Wu, Yuxiang Wei, Xiaolu Xue, Weilin Chai, Zhisong Wang, Jinliang Li, Yizhuang Xu, Wei 出版年：2025
- Fabricating quenching and partitioning (Q&P) steels with less mechanical heterogenEIty among phases is crucial for achieving balanced strength and formability. In the present study, we demonstrate a strategy for fine-tun...
- Sequential γ- ε- α′ transformation preserves high elongation in an ultrafine-grained high Mn steel
- SCRIPTA MATERIALIADong, Guangqi Wang, Lingyu Wang, Jinliang Yuan, Jiahua Huang, Minghao Wang, Chenchong Li, Yizhuang Xu, Wei 出版年：2025
- While grain refinement is a prominent way to improve the yield strength of metastable austenitic steels, it usually leads to a reduction in the uniform elongation as gamma-alpha ' transformation tends to be suppressed. I...
- Influence of DIMT on impact toughness: Relationship between crack propagation and the α′-martensite morphology in austenitic steel
- Materials Science and Engineering: AHuang, Minghao Wang, Chenchong Wang, Lingyu Wang, Jinliang Mogucheva, Anna Xu, Wei 出版年：2022
- The trade-off between transformation-induced plasticity (TRIP) strengthening and the intrinsically brittle nature of deformation-induced α′-martensite (DIM) has been a long-standing dilemma in optimizing the strength–tou...
- Scale-Up Fabrication of Gradient Structures in Austenitic Stainless Steels Achieves a Simultaneous Increase in Strength and Toughness
- SSRNHuang, Minghao Wang, Lingyu Yuan, Sen Wang, Jinliang Wang, Chenchong Mogucheva, Anna Xu, Wei 出版年：2022
- Simultaneous strengthening and toughening of austenitic stainless steel are of great importance in safety-critical applications. Gradient structured steels have thus attracted significant interest as they can achieve unp...
- Physical model-guided machine learning for accelerating laser induced plasma micro-machining process optimization
- OPTICS AND LASER TECHNOLOGYZhang, Zhen Jia, Mengyu Wang, Lifei Yu, Yu Yang, Zenan Wang, Jinliang Wang, Yulei Wang, Chenchong Lv, Zhiwei Xu, Wei 出版年：2025
- The demands for high precision and high efficiency in industrial manufacturing have driven the development of advanced laser-based manufacturing methods, especially laser-induced plasma micro-machining (LIPMM). Limited b...
- 磁场与晶粒尺寸协同作用对马氏体形核及变体选择的影响
- 《金属学报》原家华 张秋红 王金亮 王灵禺 王晨充 徐伟 出版年：2022
- 以SUS321不锈钢为实验材料,探究了300~4 K连续冷却过程中,磁场作用下晶粒尺寸对变温马氏体相变行为的影响规律及作用机制。结果表明,相同的晶粒尺寸下,马氏体开始转变温度、最终转变量均随磁场强度的增加而增加。在相同的...
- 关键词：磁场 马氏体相变 深冷处理 奥氏体不锈钢 晶粒尺寸 被引量：0
- Response of Hydrogen Diffusion and Hydrogen Embrittlement to Cu Addition in Low Carbon Low Alloy Steel
- SSRNWang, Jinliang Xu, Ning Wu, Tong Xi, Xiaohui Wang, Gui Chen, Liqing 出版年：2022
- Hydrogen embrittlement (HE) has arisen as a critical issue for the development of high strength steel. The austenite and Cu-rich precipitates can provide stable trapping sites for diffusible hydrogen, and thus improved t...
