检索结果分析
成果/Result
成果类型
- 期刊论文
- 学位论文
- 专利
- 会议论文
- 科技成果
- 标准
- 专著
- 产品
- 科技报告
- 政策法规
- 内部文献
- 报纸
- Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy
- VACUUMZhang, Ping Liu, Zehua Yue, Xiujie Wang, Penghao Zhai, Yanchun 出版年：2022
- This study aims to explore the waterjet cavitation impact (WCI) mechanism of 2A12 aluminum alloy and its dynamic penetration energy absorption after WCI treatment. The effects of WCI process parameters on the re-sidual s...
- effect of heat treatment process on the micro machinability of 7075 aluminum alloy
- VACUUMZhang, Ping Liu, Junling Gao, Yeran Liu, Zehua Mai, Qingqun 出版年：2023
- This work aims to investigate the effect of heat treatment process on the micro machinability of 7075 aluminum alloy,7075 aluminum alloy was treated with T6, T73 and RRA.T6 single-stage aging process is 120 degrees C x 2...
- effect of aging plus cryogenic treatment on the machinability of 7075 aluminum alloy
- VACUUMZhang, Ping Liu, Zehua Liu, Junling Yu, Jiang Mai, Qingqun Yue, Xiujie 出版年：2023
- This work aims to explore the effect of aging plus cryogenic treatment on the machinability of 7075 aluminum alloy in high speed cutting. First, 7075 aluminum alloy samples are pretreated by T6 and T6I4. Then they are cr...
- Investigation on the mechanism of micro-milling CoCrFeNiAlX high entropy alloys with end milling cutters
- VACUUMZhang, Ping Wang, Shunxiang Lin, Zhenyong Yue, Xiujie Gao, Yeran Zhang, Songting Yang, Hongjuan 出版年：2023
- This paper aims to explore the influence mechanism of different Al contents on the mechanism of CoCrFeNiAlX high entropy alloy micro-milling by studying CoCrFeNi (Al0), CoCrFeNiAl0.6 (Al0.6) and CoCrFeNiAl (Al1). The law...
- effect of cutting parameters on the corrosion resistance of 7A04 aluminum alloy in high speed cutting
- VACUUMZhang, Ping Gao, Yeran Liu, Zehua Zhang, Songting Wang, Shunxiang Lin, Zhenyong 出版年：2023
- This work aims to explore the effect of cutting parameters on the corrosion resistance of 7A04 aluminum alloy in high speed cutting. First, 7A04 aluminum alloy samples are subjected to short-range solution treatment unde...
- The mechanism of the effect of dual-sided waterjet peening on the surface integrity and fatigue performance of 12 mm thick Inconel 718
- INTERNATIONAL JOURNAL OF FATIGUEZhang, Ping Gao, Yeran Zhang, Songting Yue, Xiujie Wang, Shunxiang Lin, Zhenyong 出版年：2024
- This study aims to explore the mechanisms of residual stress formation and the effects on fatigue performance of 12 mm thick Inconel 718 under single-sided one-pass, two-pass, and dual-sided two-pass waterjet peening. Fi...
- Machining performance and wear mechanism of PVD TiAlN/AlCrN coated carbide tool in precision machining of selective laser melted Ti6Al4V alloys under dry and MQL conditions
- JOURNAL OF MANUFACTURING PROCESSESNi, Chenbing Wang, Xuezhao Zhu, Lida Liu, Dejian Wang, Youqiang Zheng, Zhongpeng Zhang, Ping 出版年：2022
- Selective laser melting (SLM) shows significant advantages in near net-shaped manufacturing of metal components with complex geometries. However, subsequent post-machining is usually conducted for the improvement of surf...
- effect of cutting parameters on the microstructure evolution and damage mechanism of 7075-T6 aluminum alloy in micro cutting
- INTERNATIONAL JOURNAL OF DAMAGE MECHANICSZhang, Ping Lin, Zhenyong Liu, Zehua Liu, Junling Mai, Qingqun Yue, Xiujie 出版年：2023
- This work aims to explore how cutting parameters affect the microstructure evolution and damage mechanism of 7075-T6 aluminum alloy in micro cutting. The effect of cutting parameters on micro cutting force and surface mo...
- Research on the influence of ultra-low temperature extreme environments on the surface quality and fatigue life of FeCoCrNiAl0.6 high entropy alloy
- INTERNATIONAL JOURNAL OF FATIGUEZhang, Ping Lin, Zhenyong Yue, Xiujie Sun, Yajie Zhou, Hanping Zhang, Jinlong 出版年：2024
- This study examines the impact of low-temperature cooling on the surface integrity and fatigue properties of the FeCoCrNiAl0.6 high entropy alloy during machining. Utilizing Abaqus2023/Fe-safe simulations, liquid nitroge...
- Research on the surface corrosion behavior of 7075-T6 aluminum alloy during high-speed machining and particle inclusion water jet composite rEInforcement
- VACUUMZhang, Ping Yue, Xiujie Gao, Yeran Wang, Shunxiang Sun, Yajie Zhou, Hanping Zhang, Jinlong 出版年：2024
- 7075 aluminum alloy is widely used in the aerospace field, and its use process is subjected to serious corrosion environment. This study aims to explore the influence mechanism of high-speed machining and shot peening wa...
- Investigation of residual stress formation mechanism with water jet strengthening of CoCrFeNiAlx high-entropy alloy
- VACUUMZhang, Ping Gao, Yeran Zhang, Songting Yue, Xiujie Wang, Shunxiang Lin, Zhenyong 出版年：2023
- This study investigates the strengthening mechanism of water jet (WJ) on the high-entropy alloy CoCrFeNiAlx (x = 0, 0.6, 1). Finite element simulation analysis was conducted to examine the changes in residual stress, sur...
- The effect of T4 and T6 heat treatments for dynamic impact behavior of casting Mg-Gd-based alloys
- VACUUMWang, Xue-zhao Wang, You-qiang Ni, Chen-bing Fang, Yu-xin Yu, Xiao Zhang, Ping 出版年：2022
- The study of dynamic impact properties of Mg-Gd alloy is important for its application in aerospace, automotive manufacturing and weaponry fields. In this work, the dynamic behaviors of the casting solid-solution (T4) an...
- Study on multi-field composite strengthening, surface integrity, and microstructural evolution mechanism of 7075-T6 aluminum alloy
- VACUUMZhang, Ping Yue, Xiujie Gao, Yeran Lin, Zhenyong Wang, Shunxiang Zhang, Songting 出版年：2024
- Multi-energy field composite rEInforcement technology has become a critical technique for improving the service life of key components in aviation engines. This paper aims to investigate the strengthening mechanism of hi...
- Inconel 718 alloy strengthening mechanism and fatigue life of microtexture-induced microjet coupled with cavifying water jet
- VACUUMZhang, Ping Gao, Yeran Zhang, Jinlong Yue, Xiujie Zhou, Hanping Sun, Yajie 出版年：2024
- This research investigates how waterjet treatments enhance the durability of pre-textured Inconel 718 alloy surfaces and thEIr subsequent impact on fatigue life. By harnessing the microjet effects created by the fluid je...
- effect of T6I4 and T616 on the machinability of 7075 aluminum alloy and tool wear mechanism
- INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGYZhang, Ping Gao, Yeran Wang, Shunxiang Liu, Zehua Lin, Zhenyong Zhang, Songting Yue, Xiujie 出版年：2023
- The effect of T6I4 and T6I6 interrupted aging processes on the machinability of 7075 aluminum alloy is investigated. The cutting force, cutting temperature, surface roughness, and tool wear variations of the alloy in T6I...
- Investigation on the micromachining mechanism of FeCoCrNiAl0.6 high-entropy alloy
- INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGYZhang, Ping Lin, Zhenyong Wang, Shunxiang Yue, Xiujie Gao, Yeran Zhang, Songting 出版年：2023
- This paper aims to investigate the impact of various cutting parameters on the micro-cutting mechanism of high-entropy alloy FeCoCrNiAl0.6. It examines the cutting force, cutting temperature, and residual stress of FeCoC...
- Corrosion mechanism and machinability of 7075-T6 aluminum alloy in high-speed cutting: With and without cryogenic treatment
- MATERIALS AND CORROSION-WERKSTOFFE UND KORROSIONZhang, Ping Wang, Shunxiang Lin, Zhenyong Liu, Zehua Liu, Junling Mai, Qingqun Yue, Xiujie 出版年：2023
- This work aims to explore the effect of cutting parameters on the cutting force, surface quality, and corrosion resistance of 7075-T6 aluminum alloy after and without cryogenic treatment. Cryogenically treated (T6-C) and...
- Ultrasonic peening-waterjet composite surface modification of 7075-T6 aluminum alloy for residual stress release and transformation mechanism
- JOURNAL OF ALLOYS AND COMPOUNDSZhang, Ping Yue, Xiujie Sun, Yajie Zhou, Hanping Zhang, Jinlong Wang, Youqiang 出版年：2024
- The release and transformation mechanism of residual stress contributes to the improvement of metal materials' processing and performance, enhancing thEIr structural stability, surface integrity, and fracture resistance....
- The influence of heat treatment process on the dynamic recrystallization evolution mechanism of Inconel 718 during high-speed machining
- VACUUMZhang, Ping Wang, Shunxiang Zhang, Jinlong Sun, Yajie Zhou, Hanping Yue, Xiujie 出版年：2024
- This study aims to investigate the cutting mechanisms of Inconel 718 alloy under different heat treatment processes and the grain refinement patterns of the transformed layer. By establishing a constitutive model suitabl...
- Research on fatigue performance of "sandwich metal-structured " composite materials in ultra-low temperature environments
- INTERNATIONAL JOURNAL OF FATIGUEZhang, Ping Lin, Zhenyong Yue, Xiujie Sun, Yajie Zhou, Hanping Zhang, Jinlong 出版年：2024
- The aim is to investigate the influence of aluminum content in the FeCoCrNiAlx series high-entropy alloys, different aluminum alloy damping layers, and the thickness of damping layers on the fatigue performance of sandwi...
- Research on the mechanism of microbial corrosion in the subsurface layer of 7075 aluminum alloy under different corrosion environments with ultra low temperature double increase effect
- VACUUMZhang, Ping Yue, Xiujie Sun, Yajie Zhou, Hanping Zhang, Jinlong Wang, Youqiang 出版年：2024
- Aluminum alloys exhibit a dual-enhancement effect, characterized by simultaneous increases in strength and ductility at ultra-low temperatures. This study investigates the effects of deep cooling time and corrosion time ...
- Influence of milling parameters on the microstructural evolution mechanism of 7075-T6 aluminum alloy
- VACUUMZhang, Ping Zhang, Songting Zhang, Jinlong Sun, Yajie Zhou, Hanping Yue, Xiujie 出版年：2024
- This study evaluates the influence of milling parameters on the milling process and microstructural changes in 7075-T6 aluminum alloy using experimental and simulation methods. Key findings include a direct correlation b...
- Investigation on the damage mechanism of micro-cutting surface layer of aluminum alloy 7075 with different heat treatment processes
- VACUUMZhang, Ping Sun, Yajie Zhou, Hanping Zhang, Jinlong Yue, Xiujie 出版年：2024
- This paper investigates the machinability and microscopic surface damage mechanisms of aluminum alloy 7075 subjected to different heat treatment processes during micro-cutting. Focusing on T6 and T73 heat-treated aluminu...
- The influence mechanism of water jet peening on the fatigue crack growth behavior of 7075 aluminum alloy
- INTERNATIONAL JOURNAL OF FATIGUEZhang, Ping Gao, Yeran Zhang, Jinlong Yue, Xiujie Zhou, Hanping Sun, Yajie 出版年：2024
- This study aims to investigate the impact of water jet (WJ) peening on the fatigue crack propagation (FCP) behavior of 7075 aluminum alloy, using the finite element software abaqus to establish WJ peening and FCP models....
- Investigation on the surface damage mechanism of single-crystal γ-TiAl alloy with pore defects based on nanocutting
- VACUUMZhang, Ping Zhou, Hanping Sun, Yajie Zhang, Jinlong Yue, Xiujie Wang, Youqiang 出版年：2024
- The gamma-TiAl alloy is highly regarded as one of the most promising materials in the aerospace industry. Nonetheless, pore defects are an unavoidable challenge during its manufacturing process. To thoroughly examine the...
- Investigation on the microstructure evolution and nanocutting mechanism of single-crystal copper under different crystal orientations
- INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGYZhang, Ping Zhang, Songting Lin, Zhenyong Wang, Shunxiang Yue, Xiujie Gao, Yeran Wang, Youqiang 出版年：2023
- In order to investigate the microstructure evolution of single-crystal copper (SCC) subjected to nanocutting process under different crystal orientations, SCC with crystal oriented (0 0 1) [0 (1) over bar 0] is rotated a...
- Ultrasonic elliptical vibration micro-cutting mechanism of CoCrFeNiAlX short fiber rEInforced aluminum-based composite
- VACUUMZhang, Ping Wang, Shunxiang Sun, Yajie Zhang, Jinlong Yue, Xiujie 出版年：2024
- This study explores the precision micro-machining of CoCrFeNiAlX short fiber-rEInforced 7A09 aluminum matrix composites, focusing on the interplay between machining parameters and composite properties. The investigation ...
- Study on the Micro-cutting Mechanism of 7075 Aluminum Alloy with Pre-fabricated Surface Microtextures
- JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEZhang, Ping Zhang, Songting Sun, Yajie Zhang, Jinlong Yue, Xiujie 出版年：2024
- The research objective is to explore the impact of various surface microtextures on the machining process of the 7075 aluminum alloy. Utilizing both experimental and computational techniques, this study assesses how cutt...
- High-speed drilling mechanism study of unidirectional CoCrFeNiAl fiber-rEInforced aluminum matrix composites
- INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGYZhang, Ping Wang, Shunxiang Zhang, Jinlong Sun, Yajie Zhou, Hanping Yue, Xiujie 出版年：2024
- Fiber-rEInforced aluminum matrix composites have a wide range of application prospects in aerospace, automotive, and other fields. In order to further optimize the processing technology and improve the processing efficie...
- effect of Heat Treatment Process on the Surface Integrity of 7A04 Aluminum Alloy
- JOMZhang, Ping Gao, Yeran Yue, Xiujie Liu, Zehua Zhang, Songting Wang, Shunxiang Lin, Zhenyong 出版年：2023
- This study aims to investigate the impact of heat treatment processes on the machinability of 7A04 aluminum alloy. The heat-treated samples underwent high-speed cutting tests to analyze the influence of cutting speed on ...
