文献类型：期刊文献

中文题名：利用热泵装置干燥罗非鱼片试验研究

英文题名：Experimental study on drying tilapia fillets with heat pump device

作者：李敏[1];关志强[2];王秀芝[1]

机构：[1]广东海洋大学工程学院,广东湛江524001;[2]广东石油化工学院机电学院,广东茂名525001

年份：2012

卷号：39

期号：4

起止页码：37

中文期刊名：渔业现代化

外文期刊名：Fishery Modernization

收录：CSTPCD、、北大核心2011、北大核心

基金：广东省海洋渔业科技推广专项"高品质罗非鱼干制品节能加工新技术研究"(A201001C05)

语种：中文

中文关键词：罗非鱼片;热泵干燥;含水率

外文关键词：tilapia fillets; heat pump drying; moisture content

中文摘要：为了充分利用热泵干燥装置的优势,以罗非鱼片为试验材料,研究了干燥温度、风速、物料厚度及形状等因素对罗非鱼片干燥特性的影响,获得了不同风速、不同厚度、不同温度条件下鱼片干燥曲线。结果表明,热泵干燥过程中各因素的合理匹配能有效提高罗非鱼片的干燥速度,强化热泵干燥的良好效果。不同厚度的鱼片只有找到匹配的温度和风速条件,才能使干燥阶段达到传热传质的平衡状态,在降低临界湿含量的同时维持后期的干燥速度,避免局部干缩而影响物料品质和外观。越薄的鱼片越易找到匹配的条件,厚3 mm鱼片更容易找到匹配的干燥条件。

外文摘要：In order to make full use of the advantage of heat pump drying unit and optimize the heat pump drying process, take the tilapia fillet as experimental material, this paper studied the drying temperature, wind speed, material thickness and shape on impact of the tilapia fillets drying characteristics. Obtained at different wind speeds, different thickness, under different temperature conditions fillets drying curves. The results showed that： it can effectively improve the drying rate of the tilapia fillets, and strengthen the good effect of heat pump drying if the various factors in the heat pump process match reasonably. The tilapia fillets of different thickness can make the drying stage to reach the balance of heat and mass transfer with the temperature and wind speed match. The matching conditions can reduce the critical moisture content, maintain later drying speed, avoid local drying shrinkage and influence material quality and appearance. And the thinner the fillet more easily find the matching conditions , So 3 mm thick fillets can find more easily the matching dry conditions in this test.