文献类型：期刊文献

中文题名：HSK-A63测温刀柄的结构设计及模态分析

英文题名：Structural Design and Modal Analysis of HSK-A63 Tool Holder with Temperature Measurement

作者：徐红[1];李广慧[2];谭光宇[2];郭林林[2];魏波[2]

机构：[1]济南大学泉城学院工学院,山东蓬莱265600;[2]广东海洋大学工程学院,广东湛江524088

年份：2015

卷号：33

期号：6

起止页码：64

中文期刊名：机械与电子

外文期刊名：Machinery & Electronics

收录：CSTPCD

基金：国家自然科学基金资助项目(51375099)

语种：中文

中文关键词：HSK-A63刀柄;模态分析;固有频率和振型

外文关键词：HSK - A63 tool holder; modal a-nalysis;natural frequency and mode shapes

中文摘要：为了便于测量立铣刀铣削温度,通过改进HSK-A63刀柄的结构,把测温数据采集模块安装到刀柄内部,设计出热电偶测温刀柄。利用Pro/E5.0软件建立嵌入式测温刀柄主体、弹簧夹头/螺母、立铣刀的三维实体模型并进行装配,在ANSYS Workbench中确立合理的边界条件和网格划分的基础上对装配体进行模态分析,得出固有频率和振型。

外文摘要：In order to measure the end milling tem- perature of end mills and by improving the HSK - A63 tool holder structure, a temperature measurement data acquisition module was installed into the tool holder and a thermocouple tool holder with temperature measurement was designed. A three - dimensional solid model of the tool holder with temperature measure- ment was established and assembled along with a spring chuck/nut and flat end mill using a software program called Pro/E 5.0. Boundary constraints and meshing in finite element model were imposed and nat- ural frequency and mode shapes of the tool holder as- sembly were calculated by modal analysis using AN- SYS Workbench.