Hydrogen embrittlement (HE) has arisen as a critical issue for the development of high strength steel. The austenite and Cu-rich precipitates can provide stable trapping sites for diffusible hydrogen, and thus improved t...
Hydrogen embrittlement (HE) has arisen as a critical issue for the development of high strength steel. The austenite and Cu-rich precipitates can provide stable trapping sites for diffusible hydrogen, and thus improved t...
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&TXi, Xiaohui Liu, Zhikun Qin, Zhenbo Wu, Tong Wang, Jinliang Xu, Ning Chen, Liqing 出版年：2023
In this work, the feasibility of using "grain boundary engineering" to reduce the susceptibility to hydrogen embrittlement in a low carbon low alloy steel was examined. By adding Cu element, the fraction of random grain ...
This paper presents an investigation on the role of Cu addition in microstructure and toughness of intercritically reheated coarse grained heat affected zone (ICCGHAZ), aiming at elucidating the influencing mechanism of ...
This study used the electrochemical hydrogen permeation test and the slow strain rate tensile (SSRT) test to examine the impact of Cu addition on hydrogen embrittlement (HE) in a low carbon high strength steel. The follo...
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&TXi, Xiaohui Wu, Tong Wang, Shuai Wang, Jinliang Wang, Gui Chen, Liqing 出版年：2023
In this study, the coarse grained heat affected zone (CGHAZ) of Cu-containing/free steels was simulated at various heat inputs by thermal simulator. A comparative study was conducted to reveal the role of Cu addition and...
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&TXi, Xiaohui Wu, Tong Tian, Yuwan Hu, Jun Huang, Shuntian Xie, Tingxin Wang, Jinliang Chen, Liqing 出版年：2023
This work presents an investigation on the role of reverted transformation in hydrogen embrittlement, aiming at revealing the influencing mechanism of austenite and grain boundary characteristics on hydrogen embrittlemen...
PurposeThe purpose of this paper is to study the effect of chromium content on the microstructure and corrosion resistance of Ni-Cr coating. Design/methodology/approachNi-Cr coating was prepared by pulse current electrod...
STEEL RESEARCH INTERNATIONALWang, Shuai Xi, Xiaohui Zhao, Yang Chen, Liqing 出版年：2023
Herein, the microstructure and mechanical properties of medium-carbon high-silicon spring steel are studied, which is alloyed and/or microalloyed with Cr, Mo, Ni, Cu, Nb, and V, and subjected to various austenitizing and...
Understanding the martensitic transformation mechanism is of critical importance to control martensitic transformations and hence retained austenite. Linear defects reported in a previous study can provide nucleation sit...
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&TWang, Jinliang Liu, Yujie Xi, Xiaohui Liu, Qiang Chen, Liqing 出版年：2025
Cu has been regarded as an important element to improve the corrosion resistance of steels, but little was known about the role mechanism of Cu addition in low carbon low alloy steel. Therefore, on the basis of a newlyde...
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCEWang, Jinliang Dong, Guangqi Li, Youchi Xi, Xiaohui Chen, Liqing 出版年：2022
The effect of welding and postweld heat treatment on the microstructural characteristics and mechanical properties of a Cu-containing low-carbon low-alloy steel was studied. The obtained results indicated that ferrite, b...
Use of layered double hydroxide (LDH) conversion films is an effective method for enhancing the corrosion protection of metals, which has been extensively studied on non-ferrous metals. Steel, being the most commonly use...
STEEL RESEARCH INTERNATIONALTang, Ye Liu, Zhenguang Gao, Xiuhua Xi, Xiaohui Wang, Jinliang Liu, Ziquan 出版年：2025
Hydrogen embrittlement (HE) occurs as a result of hydrogen atom ingress and causes a significant decrease in plasticity and strength, making it a crucial failure mode in high-strength low-alloy steels. The microstructure...
A good strength-toughness combination is difficult to be obtained in welded joint of low carbon low alloy steel. In this work, a new idea was proposed to improve the strength and toughness of welded joint by strengthenin...
Using Cr-bearing low-alloy steel is an effective preventive measure for marine structures, as it offers superior corrosion resistance when compared to plain carbon steel. However, it remains unclear how quenching and tem...
Understanding the thermal stability of austenite is critical for designing high-performance steels. Grain size is a key factor controlling thermal stability, but the underlying mechanisms remain partially unclear. For in...
Fabricating multi-material metal sheets through heterostructural design has gained significant attention for achieving multi-objective performance optimization. Present fabricated tri-layered steel (TLS) sheets with a 31...
渝公网安备 50019002500408号 违法和不良信息举报中心